Fibre optique
Crimp Splice Protector
The crimp splice protector is used to protect single-fiber splices with 250μm primary coated fibers. The uncoated fibers are unprotected at splice point and the protection must therefore be restored after the fusion splicing.
The crimp splice protection offers the fastest and easiest solution for guaranteeing the required protection. It lends the splice mechanical stability and protects it from environmental influences and from damage during handling and splice storage.
Ce produit vous intéresse ?
Contactez nous
Caractéristiques
• Easy, safe handling
• Installation time <5s
• Compact dimensions 30mm x 1.3mm x 3.2mm
• No electric energy required
• Million-fold proven technology
• No additional attenuation
• Protects 250μm splices with uncoated fiber length of up to 22mm
The v-shaped design enables application after splicing, eliminating threading before fiber preparation. This saves time and eliminates repeated splices resulting from a failure to apply the protector before splicing.
The compact dimensions permit maximum density storage in splice trays or splice support combs.
The v-shaped aluminum support is corrosion resistant, offers the required mechanical protection and, due to the precise open angle with tight tolerances, guarantees the precise compatibility with common crimp devices.
Protection against environmental influences is ensured by imbedding the splice in a permanently elastic butyl mass.
The protector can be closed manually quickly and easily with a crimp device. When the 1.3mm crimp width (dictated by the crimp device) is observed, no additional losses or other optical influences will impact the splice.
Furthermore, no additional electric power is drawn from the batteries of a fusion splicer.