Fibre optique

Fusion Splicer - Fibre optique -  Electricité

Fusion Splicer

 

With built-in NiMH batteries (3.8Ah) and a charging circuit.

A desktop power supply for charging and operation on mains supply is included. The attachment power supply or workstation is replaced by that.
The FttX75 has fixed V-grooves for passive fiber alignment on cladding. The FttX75 is equipped with the proven high-resolution video image evaluation system L-PAS™ (Lens-Profile Alignment System).
Its dimension is 200 x 220 x 95mm, so it is extremely compact, and weighs 2.58kg (with integrated batteries), so it is very light.

 

Applications
• For splicing all commercially available single- and multimode glass fibers and special fiber types
• For use in MANs, LANs, FttP, distribution networks, building cabling systems and CATV networks
• Splice loss typically less than 0.05 dB with identical standard single-mode fibers with low core eccentricity and typically less than 0.02dB with multimode fibers
• Ideal for applications with limited space and where low weight is required (e.g., when splicing with minimum fiber slack or in case of FttP applications)


Ce produit vous intéresse ?
Contactez nous

Caractéristiques

 

• Built-in 3.8Ah NiMH battery pack
• Operating time with heat-shrink oven: 2h 15min
• Operating time w/o heat-shrink ov: 3h
• 100W desktop power supply
• 5.5 inch color TFT display (QVGA resolution; 100x magnification)
• High-resolution video image evaluation system L-PAS™ for fast pre-alignment, evaluation of fiber position and end face, contamination detection and simultaneous fiber display in two views
• Fully automatic splice process with single-key operation and typically splice cycle times below 15 seconds
• Splice loss estimation
• Evaluation of cleave angle, contamination, fiber position and fiber axis angle
• Predefined programs for all common fiber types
• Memory space for user-defined programs
• Memory for 250 splice data sets
• Fully automatic or manual mode
• Tensile test facility
• User-definable x/y offset limit
• Alarm limit with acoustical warning when the userdefined threshold values are exceeded
• Altitude compensation for up to 4,000m above sea level
• Port for video output to TV set (PAL)
• Serial RS232 / V.24 interface to output splice data and parameter sets

• 12V DC port to connect additional accessories
• Simple maintenance of electrodes and optical system
• Very compact dimensions (200 x 220 x 95mm)
• Very lightweight (2.58kg with integrated batteries)